Single Platform Super Titan

GENERAL DESCRIPTION
These custom-built, heavy duty hydraulic lifts are designed to satisfy the heaviest material handling and labor efficiency improvement requirements.  Available in both surface and pit mount styles and ranging in capacities from 5,000 lbs. to 52,000 lbs. and in travels from 12” to 120”, these lifts will satisfy even the most grueling material handling needs.  Typical applications for these products are heavy duty and high cycle conveyor systems (where downtime costs money), moving fork trucks between (2) levels, and unusually large or bulky products that need to be raised or lowered to allow an operator easier access to the product.

KEY FEATURES

• DU lubricated-for-life bearings on all pivot points
• Solid steel legs (8”, 10” or 12” x 1"/4” thick)
• Minimum plafform thickness of 1/2”
• Turned, ground, polished and hard-chromed axle pins
• Double-wire braided hydraulic hoses
• Velocity fuses on cylinders
• Super torque motor
• Four-inch hydraulic rams with solid steel rods, hard-chromed
• Built and designed in accordance with ANSI MH29.1
• Factory tested to 110% of capacity
• One-piece hydraulic valve block
• Maintenance leg

BENEFITS

• Maintenance free bearings, no greasing
• Minimal platform deflection
• Extended bearing life
• Extended hose life for added safety
• High efficiency motor provides faster raising times and lower electricity bills
• Easy servicing of hydraulic valve components
• Extended cylinder life
• Zero free fall in case of severed hose – Safety first!

* CALL FOR QUOTE -- Ordering Info

Back To Top

Hydraulic Freight Lifts

SPEC SUMMARY:
This line of Freightlifts offers an economical and safe way to move materials between two levels, requiring less than 28 feet of vertical travel. Units of this type are suitable for intermittent duty operation.  Freightlifts provide a safe and economic alternative to fork trucks and elevators, resulting in cost savings up to 50%. This line of Freightlifts comes equipped with matched hydraulic cylinders, cables and sheaves, or direct acting cylinders, as well as all controls and devices necessary for two level operation. In the lowered position the platform rests on the floor, however in the raised position hydraulic pressure builds to eliminate hydraulic drift.  Typical applications involve retrieving or placing products in storage on a second level or mezzanine or being utilized as part of an automated conveyor system.

Capacity:

12 models available with capacities from 1,000 to 6,000 lbs. There are six straddle and six cantilever models. 

Travel:

Maximum height 28' with 2 stops. 

Platform:

3' x 3' min. to 8'x10' max. 

Speed:

25 fpm 

Power Unit:

5 hp 3-phase 

Controls:

Two, 3-button, (up-down-stop). 

Features:

Meets ANSI/ASME B20.1. Zero drift feature. UL listed controls, tension platform roller, swaged cables and fleet sheave arrangement. Accommodates C, Z, or 90 load patterns.

GATES AND ENCLOSURES:
All Freightlifts require by ANSI B20.1 code, an enclosure and gate at each landing or stop. There are three standard gate options: A single or double outward swinging gate panel; a horizontally sliding gate panel; or a vertically raising gate panel. Each gate features a proven and dependable electro/mechanical interlock that allows the gate to be opened only when the platform is at that landing. A number of custom variations are also available.

SYSTEM INTEGRATION:
All Freightlift models can be integrated into an automated conveyor system. Freightlift/American Custom Lifts engineers stand ready to work with any system designer to provide custom specifications or any special accommodations necessary. The mechanically raised and lowered models are often the easiest to integrate into a system because they offer the most control over their stop and start movements. However, Freightlift hydraulic models and the PackageLift have been used quite successfully in a number of specialized applications. Freightlift America! takes a back seat to no one in providing standard and custom models for system integration.

* CALL FOR QUOTE -- Ordering Info

Back To Top

Mechanical Freight Lifts

SPEC SUMMARY:
This line of Freightlifts is designed for raising product up to 100 feet while providing the operator with control for stopping at multiple positions or multiple levels allowing for more precise control over stop-start movements. Units of this type are suitable for continuous duty operation. Mechanically operated by means of a brake motor and gear reducer on a common drive shaft, the raising and lowering of the carriage is accomplished by a heavy duty roller chain.  Typical applications consist of retrieving or placing products in storage, being utilized as part of an automated conveyor system, or working in conjunction with horizontal conveyor systems to provide vertical lift.

Capacity:

17 models available with capacities from 1,000 to 15,000 lbs. There are six straddle, six cantilever models and five 4 post models.

Travel:

Infinite stops up to 100 ft.

Platform:

3' x 3' min. size, to 12' x 15' max. size.

Speed;

30 fpm; higher speeds available.

Power Unit:

2 hp to 20 hp motor depending on model, all 3-phase.

Controls:

All controls included for full call/send capability from any level.

Features:

Meets ANSI/ASME B20.1. Gear motor with electric brake. Surface or pit mounted. 4 Post allows access to carriage from all four sides.

GATES AND ENCLOSURES:
All Freightlifts require by ANSI B20.1 code, an enclosure and gate at each landing or stop. There are three standard gate options: A single or double outward swinging gate panel; a horizontally sliding gate panel; or a vertically raising gate panel. Each gate features a proven and dependable electro/mechanical interlock that allows the gate to be opened only when the platform is at that landing. A number of custom variations are also available.

SYSTEM INTEGRATION:
All Freightlift models can be integrated into an automated conveyor system. Freightlift/American Custom Lifts engineers stand ready to work with any system designer to provide custom specifications or any special accommodations necessary. The mechanically raised and lowered models are often the easiest to integrate into a system because they offer the most control over their stop and start movements. However, Freightlift hydraulic models and the PackageLift have been used quite successfully in a number of specialized applications. Freightlift America! takes a back seat to no one in providing standard and custom models for system integration.

* CALL FOR QUOTE -- Ordering Info

Back To Top